Activity Stream

Nice. Good to hear that PixelRadio is working. - Thomas

Yeah,I have a spare and used it and things are ok. Figured I would take a chance and see if I could get the mod working. I'll check the resistor. I...

Your ohmmeter should be able to confirm the resistor is OK. No need to remove for the measurement. I have a hunch the resistor is OK and a nearby...

Yes, Going to try another card. Figured that the resistor was the issue. So far I've tried my usual palces and 0 ohm isn't available.

Then that means it does not detect a card is present. Are you sure the card is formatted correctly? The microSD Card (32GB or less) must be formatted...

Not seeing any reference to the SD card. These are what was found for wifi... 00:00:22.384 {ERROR } -> WiFi Connection Failed. 00:00:22.384...

The "waitForRDSSend() function time-out" Error message indicates that the ESP32 is running. But the FM radio is not working correctly, which is...

Putty is replying with this....{ERROR } -> Abort: waitForRDSSend() function time-out! Edit: Now alot of things are popping up.

Credentials.txt file is till on the card. Going to Putty into the logs.

Ok,let me take a look.

After running the Emergency workaround the credential file should be deleted from the SD card. So put the SD card in your PC and confirm it was...

Yeah,worked fine before the swap. Emergency workaround didn't work either. Funny thing is,the green LED is solid as if I had out in my wifi...

15' is not that far. I would give it a try.

Yes, the import and export tools will handle it. Once you have a mapping setup, you should be able to pass them back and forth with that.

You can do that too. Either by multisync, or via FPP commands to trigger video rolls.

My matrix display is not high enough resolution, so was hoping to trigger videos to play on the projector when called out by Vixen on the FPP.

Thanks. Yes most of the time it will be just adding standard effects in Vixen. If it becomes more involved where I have media added to the grid, will...

Agree with Tom. I would also add that you can test this comfortably in the lab, with your wires all coiled up. A 30-foot coiled up wire, going to a...

Yes very important on length if you plan on placing the pipe in the ground for support. On my tree that size, I use a concrete slab with a wood...

Falcon and Kulp controllers already have RJ45 jacks, which already transmit pixel data over Cat5 to receivers (also which have RJ45 jacks). You're...

Mike, we can all guess and give you our opinions, but the best thing to do is TEST it. My best guess is that it will probably work without null...

Let me restate my questions with more detail. In my display I use inflatables. Last year I placed pixels in some of them. I want to do that again...

So I started the task of putting things together last night since all but 3 parts have arrived. Working on 5 boards, starting with the resistors,...

If the element setup is not changing and you are just sequencing, then most of the time you can just copy the sequence file itself. The main...

I believe this to be a Windows 11 issue. Installed Vixen 3 on a Win 10 PC, used existing USB to serial, serial to RJ45 cable and all channel lights...

I'm more confused by your explanation than I was from your original statement. You are certainly entitled to you opinion as I am to mine, this is DIY...

If the resistor's installation has any issues then the WiFi signal could suffer a lot. Possibly explains the missing AP. Did it work correctly...

(edit: delete. I did shooting star in Xlights. This is the Vixen board.)

Sounds like you are as ready as you will ever be.

I use the Noctua NF-A6x25 PWM on the IPV-1115.