Activity Stream

Like others, F16s proliferate my display and for the most part are my "goto" controllers. This year there are 11. However, the Kulp controllers...

I LOVE my F16s (yes I have four in the show). They have been my goto controllers since the blue boards came out. Anytime I have had an issue, I have...

Is it possible your USB-Ethernet adapter is faulted, or not compatible. I run several Kulp boards...some WiFi and Some USB-Ethernet adapter. 2 K4-PB

Define better a bit...but before you do that, considering your experience with the K4, why would you consider the K8? Try the F16. You might have...

I've given up on the K4-PB. It's heading back to KULP. So here's my question..... Which one is the better one to go with, the K8-B Beaglebone...

V4 software is designed to run on the ESPixelStick V3 hardware. In addition, it runs on over 15 other hardware platforms including ESP32 based...

go to www.jdeation.com. You can lay out the entire interior of a controller and then either order one or print out a pattern you can use on plywood...

Hi Espixelstick V4 is software for esp32 or esp8266. Its still in development stage but has been used loads. It allows you to store the pixel data...

Not so FAST!! https://www.msn.com/en-us/news/us/tmt-farm-s-christmas-lights-will-return-in-2024/ar-AA1gNb69 If you want to take a guided tour...

It looks like the DIYLED web site is back up and running this morning.

I placed an order August 25th and never received any shipping notifications, but received my order on Sept 5th. Shawn

I was in the same boat which is why I had been checking their site for a few days. I found that wired watts has some DIY pigtail to xconnect adapters...

Looks like dvc2013 may have been one of the last to receive an order from them. I ordered 5 pixel strings from them on 9/5. I got an order...

mDNS is a way for the controller to tell the network its unique human acceptable name (like a hostname). This allows you to configure the data source...

I'm running twin K32's, and my networking suffices, although I still don't have DNS and I don't understand what this mDNS is in Falcon. I don't use...

When I first noticed the issue, I let him know and he was willing to replace it. But if I could make it work with a simple cable, I was OK with it. ...

Happy belated Birthday Al!

I recently made 100 5-pixel stakes ;I soldered all of them. If I had the time and money I would have ordered them from Ray Wu as custom icicles.

Thanks for the speedy response. I have to the feeling of regret regarding this purchase continues to grow. The lack of response from them is...

Yes, two of my six kulp boards, the usb on the board doesn't work properly. I was able to get one of them to work"ish" by adjusting the pins inside...

I usually get Dollar Store cutting boards and make mounting plates out of them.

Thank you! You have verified what I was thinking was the case. Mike