Activity Stream

These are the enclosures included with the kits.... ...

As I'm cutting down 120v 14g cables that I have a ton of, its easy to strip the jacket off of a short length to use for the jumpers. Still leaves me...

Hold up a sec. There is a way to calculate this. Look at the side of the PSU, it should give you a max current rating. Multiply that by the number of...

Depending on the load and how many you are wanting to string together, it "may be OK" but you could also bump up to 14 awg like used in household...

That's assuming the 3 prong supply cable is 14awg, most use old PC or similar cables which may be 16awg but normally are only 18awg. But yes I...

I am in Ottawa. A step drill bit is something I have so that's good. However, looking at ronas website I can't find the pipe strapping. Could it...

Shipping to 92883 is $40.

Is there such a thing as a 24 PORT pixel controller? Falcon with 16/32/48 ports seems to be the common port density leader. For a single mega tree...

I have some 4x lynx Zeus 16s ( 1 assembled and 3 not ) for sale. Also have 2 assembled etherdongles as well. Sent from my iPhone using...

Would it be cheaper to go GPIB-to-RS422?

Sadly, yes. I have some old equipment (think pale green/grey HP with green CRT screens), so the only option to take to them is via GPIB. If they...

I feel your pain. I have had a few years with minimal shows. I tell you, age plays a big part also.

Are you sure you need GPIB? That is in itself an expensive buss. I would bet it is cheaper to plug into a USB port on the computer that has the GPIB...

Is the enclosure already drilled to fit wire through for each pigtail? EX. 1 hole on each side (Bottom) to fit the 16 pigtails needed?

Hello, I tired to PM you. However, I get this message

I daisy chain the 120v when I have 2 PSUs and 2 receivers in the same enclosure. I figure this is how house wiring is done and I always stick to 14g...

Last night was a late re-learning night. I need to spend more time throughout the year using and setting up my Christmas display, software and...

No, I did not state that....and please stop putting words in my mouth. I'm only giving additional information to consider before making a decision...

Hiya Keith I forgot to mention in my posting that my knees started acting up (again) back in October when I was putting Halloween items out in the...

I just want it to work the way it is designed to. So did I, in fact I thought it must be designed to pass Renard serial correctly so I spent a...

Yeah I guess that’s what I’m going to end up having to do... the falcon passes the data through the serial out to the renards but it looks like it...

Yes they do and the SE-350 spec sheet is for all SE-350 voltages but it does not mention anything about shorts. ...

Too Funny :biggrin2: I've got my three assembled with power supplies into battery boxes, ready to put out in the yard. Time to get busy. Don