Activity Stream

FYI from the Wiki

Hey, if you have any left, let me know. I?d be interested in purchasing a kit or two.

I had tried the xlights upload yesterday and it gave me grief, but thanks to that video I was able to straighten out my hinkspix config. I got...

Here is the show set up and a snap of the scheduler log. The transitions are around 30 seconds and sequences are all 2+ mins or so.

I?ve got a ton of komby stuff as well if anyone?s looking for built controllers, parts, sandwiches, you name it.

If you don't hear back from him by sometime on Monday (give him the weekend to do what we are all doing this weekend!), you should call him. His...

Show a picture of your schedule setup.

If your pixels are 5+ years old that work, have you tried to change the gap timeout? I have no idea what that is called on the E6804 but with newer...

Thanks for that feednack

I think I have a jumper on both? so just remove the one? Sent from my iPhone using Tapatalk

I did t have the 8 channel in there u till today! I wanted to see if I put something in it if I would do anything. I?ll remove the 8 channel ...

If you only have 1 RS-485 adapter, and you plan on daisy chaining one controller off the other, you'll just build one 32-channel (24+8) Renard in...

OK, one of those videos I'd never seen. I now have the hinks pix lighting up the appropriate universes (except my tree that has 2 bum legs. I'll look...

Thanks for looking in to it. Sadly, when I move that slider, the stops only give me 134% and 136% - can't get 135% - no zoom level shows the...

I just swing the cable over to the 8 channel and programmed 4 channels see picture. I took 4 elements from the 24 and brought them to the 8. So I...

I gotta say, I have never had to do this so I am a bit confused as to why this year. Doesn't matter, but it took me a while to find as I have...

Ok. New info. 2 boards. Troubleshooting now depends on how they both behave under the same test criteria. When's the last time the 8-channel...

Great, I knew I was missing a basic option. Thanks.

Im kinda confused by all that! I just tried using my eight channel controller I took 4 elements and patched them to it and I still have nothing...

I am curious what does your display setup look like? This is how my mini-trees are setup. Each of these trees supports LED strands of red, green,...

Just a final update on this. FPP was to blame: I put a different (older) version on the Pi where the lights were acting up, & it works just fine...

No, not nodes, just individual strings of lights, each tree has single R, G, W. I like how I can run an effect at the highest level, color...

I believe Vixen wants to keep the node names unique across the entire profile. Do you have nodes for Red, Green, and White on these trees?

I think "RS-232 Communication (direct connect to PC)" with JP1 installed means using the DE-9 serial connector on the Renard cabled direct to a DE-9...

So I have reached out to the Vixen leads on this issue. For the time being, have you tried changing the zoom at the bottom of the Setup Preview...

Reading the Q/A on the link you posted it appears that they had wiring color order issues during manufacturing with some of their inventory. all...

my show went live tonight as well. I also had to takr care of a few "you know better" moments.