Activity Stream

Vixen 3 definitely has a fade option. Using "pulse" you can set it to either ramp up, or ramp down (or even ramp up and down). One thing to know...

There is, in a way.. but the above would be of no use for this application. https://ronsholidaylights.com/rx-board-pixel-extender-receiver/

I haven't tried them yet. I went ahead and added resistors to all my Renards. Sent from my SM-T710 using Tapatalk

That does work Scoobysnacks. It is exactly how the differential remotes work providing RS485 to 4 different outputs on the remote. Note that pairs...

Are the Falcon series of controllers' serial outputs considered balanced line drivers? I'm thinking yes. If that's the case, then is it safe to...

Woot . Good Going Carl . I think there is an over abundance of factors to consider in this hobby now and micro managing details matter . It...

If you are using a balanced line driver (DMX/RS-485) then the data + and Data - lines are required and the ground is optional. If you are using the...

I looked over the Falcon manual on the serial outputs to learn from this, and your wiring schema you posted all checks out. I noted that you used...

Not sure what you are really trying to do. Almost every effect in V3 has an intensity curve over the life of the effect. If you want one part of the...

If it passes data to the pixels I would not worry about it. Sure it may not be perfect, but it will be functional. Sent from my SM-G930V using...

Would not run at all if the voltage was off. Really sounds like the program or reset button are not making it to the ESP-01

Also, what is the difference between carbon film and metal film resistors? Would there be a preference for this application?

In reading this thread, I've found the information to be most helpful. For those who have charged ahead and done some testing, is the general...

For its intended use, remote access points, cameras, etc., I believe it is enough. The overall length with multiple units is impressive for wired...

genuinely curious, any blinkyflashy stuff that can use poe? that extender can only do 22watts.

Let me know if you have anymore issues with it. Here are some voltage test points as well. ESPixelStick V2 Voltage Testing by smerrick, on Flickr

I changed the ESP-01 module as i have a few spare, Didn't work. So i created another espixekstick and put the ESP-01 on that and programmed it and...

LAMAR, Please go back to post #15 - http://doityourselfchristmas.com/forums/showthread.php?47665-Falcon-f2&p=469559#post469559 I provided you...

While a bit on the pricy side, the $70 one has the stuff you need. Without the video cable you can get it for $10 less. However, the video cable is...

Is this the right raspberry pi 3 Sent from my SM-N910T using Tapatalk

I use PVC for my verticals. Tops are flattened and bent to form hangers with the help of a heat gun and sheet metal pliers. Bungee cords keep them...

Can you swap the ESP-01 module to another board and verify if the issue follows the board or the module? thanks, -shelby

From the manual LED Power Indicators http://www.mouser.com/ProductDetail/VCC/4302H5-5V/?qs=/ha2pyFaduj5KI/zeDiZsAZck9dAbeDXYH66aPSma4k= ...

Still waiting on the sample boards to come in. Also still waiting on some of the components to arrive from China. Don't have a solid eta yet ...

I was curious as to the status of these. I used the ones I had for another project and was wanting to get some for this upcoming season...

Hey, this is awesome. Thanks for the quick reply and the good news. :-) Yeah, I completely realize that what I'm doing is a very niche case, and...

Looks like a spammer getting ready to make his or her run. first post of new member talking nonsense on a two month old post.