Activity Stream

Hi! Find in aliexpress, Ray wu's is good seller. I'm from Spain and is difficult find it in the local sellers. In my thread are different...

It's also possible that your relays need the Vixen data inverted, i.e. Vixen 0 = relay ON and Vixen 255 = relay OFF. If so you can invert the Vixen...

It sure does :D just tested it

The three 8 bit values are NOT a color. They are an intensity (PWM duty cycle). The color mixing lens combines the RGB into the other colors. So when...

Hey there. Did I see that someone is ordering PCBs? I need a few of these. thanks

Hi, swapping that to digitalWrite() means that 0 is off and 1 to 255 is on. Does 0 turn off the relays?

I noticed one of your posts, you mentioned you cut the strips at 50. Then you added the 5vdc to the next strip. Did you continue the data lead from...

Here is the post with the code that I use. http://doityourselfchristmas.com/forums/showthread.php?36477-Multiple-Arduinos/page2

OK, i had something writen here yesterday saying it was waiting for admin approval and now its gone. Oh well. The code i used I got off this forum....

Yeah, my bad. I guess I didnt state it very well. It was a long day of trouble shooting and I still haven't gotten any farther on this. I load up...

Xschedule does have a dimming option. Both global and for limited channel ranges and even one that is smart enough to just dim white. The downside is...

Not to argue, but to understand. The 24bit value is 8bits for R, 8bits for G and 8bit for B. So that sets the color itself, by the combination of...

I'm talking about a sidewalk leading up to my house. And just attaching PVC does not provide enough pressure to drill through the caliche here in AZ.

I have no problems when I do it I create a profile on new computer I take my zip profile unzip it to a folder and copy my files and folders in it and...

Ok, I find the right folder now. Copy the datas. Then I create a new profile a second one and copy again all backup files in the folder of the new...

In my state, they plow the sidewalks. If you were lucky, only the part crossing the sidewalk would be snipped. Most likely the entire cable and...

I tunneled under my sidewalk and installed a 3" pipe. In the offseason its capped at ground level. Buy about a 6' x 1" steel pipe with threads on...

i dont really know. depends on the cabling you use and if there is EFI near your wires, water can bleed through the insulation on your datawire and...

Same issue as fixed in the bug referenced above. It was a locale issue and was fixed in the dev build referenced in the bug.

Nope. Does not work exactly that way. You send a 24 bit number to the pixel. The pixel circuit will output a pwm signal to the LED (this matches your...

What is the recommended MAXIMUM length between pixels to not require any extra components?

Found it/re-did it just now: 09/19/2017 16:55:41.144 An application error occurred. Please contact the Vixen Dev Team with the following...

the logs are always in the default profile, not the current profile. You can always get to them thru the menu on the main vixen screen.

No logs are generated. I cleared my projects logs and redid the steps to crash it. The folder is empty. Are there logs beside the ones in the project...

So is the FPP test mode running 100%? I'm just thinking outloud here for a moment. Dimming of a normal LED, a single LED, can be done by changing...