Activity Stream

30 feet of 18 gauge wire should be good for about 1V drop. That should work pretty well.

Bad card? No sir I don't. I do remember adding a card to a AliExpress order once, might have been that one. Most Name Brand class 10 A1 cards...

Happy Birthday Kelly. Hope you have a great day.

I suspect you would not have an issue up to 14v. However, using regulated strips would remove all risk

I don't want to hijack (this is about moving heads--not lighting boards), but I inherited a Chamsys QuickQ 10 board for stage lighting, and a Kulp32...

Not on these.

Getting back to this, I?ve finally gotten a layout (Preview) completed. All the minor annoyances aside (every system has annoyances, LOR seems to...

Is there a voltage adjustment screw in the psu Sent from my SM-N975U using Tapatalk

For WS2811 you will want to add a different controller type. There might be such a thing as a DMX->WS2811 converter but you'd be limited to 170...

Thanks Ritchie, I bought a USB-FTDI-DMX thing for about 20 euros, hope it works when I get it. Really hoping I can fully marry together ws2811 and...

I built an 8 x 8 x 8 RGB cube - everyone who visits our house says they want one but I say 'no' because there aren't enough hours in my life. It's a...

It will work with QLC+ yes, I have that too. I use QLC+ to get the channel values I wanted to use in Vixen, since you can control the heads with a...

https://github.com/mrfaptastic/Glediator3

Do you recall where you got the first card?

I just saw this on xLights FB page and thought I would share it with y'all. ...

Last year I reworked my Desk (Test) set up. I figured it was not going to be out in the changing temps in the yard so I tried a off brand SD card. ...

I'm not so sure.. I dont believe I included late lastnight as I was still working on it that the card with version 4.6 wouldn't even boot up for me...

There is another piece of software for matrix control called "Jinx". http://www.live-leds.de/

those are known as 3:1 WS2811 pixel strips. Three TRI-Color LEDs attached to a ws2811 driver chip.

Would something like this work with ESPixelstick? https://a.co/d/fJHIHDJ I'm looking for cheap/simple pixel options for my props. Preferably...

OK so I cant read. I found the issue in that I changed the Preview setting to 'All Previews' and that seemd to do the trick ... now I can continue...

SO I got PEAKS to work, but the ALL does not... Is there a restriction to the number of layers?