Activity Stream

Sounds good. Thanks Guys for the help. I will look into getting a pickit3 ordered to make things easier at Christmas. I hope to be running off a...

If he can reprogram the PICs on the Renard64, he should be able to reprogram the PIC on the PX1.

Yes you can. FYI: It is not hard to reprogram the Ren64. Internally it is 8 ren8 devices wired in series (aka eight chained ren controllers). You...

I think I found the issue. I don't think the baud rate is updateing on the px1. Seems as though no matter what I try to set it to it only matches up...

This is looking perfect! Not sure if the Machine function should not have an on value or not. I should be able to put it into practice sometime today.

A couple of things to note: Color order should only be set in one system. For example Setting RBG on both Vixen and on the PX1 will result in the...

Thank you, that makes everything a bit easier. Is some type of power source needed for the pixels? I'm using 12v pixels. Just another dumb question. ...

Yeah, looks like a bust... I got excited when I remembered the "wayback machine" website recently and found landolights.com in there, but went...

I have progress. Not sure what I have done , but by brute force of trying settings over and over I have the FE light off, the RX light on when...

A pi hat/cap like this one https://pixelcontroller.com/store/pixel-controllers/47-falcon-picap.html can run two ports of at least 800 pixels. So, no...

I am using a USB to Rs485 adaptor and cable. The cable currently works sending data to Ren64, and has worked going directly to the px1 but does not...

The Ren Wireless had an issue with communications and the answer was to use 2 stop bits. Although you shouldn't need that in this case, it is an easy...

until you get the serial link working, the color handling is not going to matter. What type of serial adapter are you using on the PC? Link to it...

I fixed the bubble wand speed. I missed selecting the "Use Curve" check box. I named this fixture profile "Fobbles F3 V2". Delete the Fog Machine...

They likely won't run cooler as they require much more power. My gut feeling it none of the current hats will work without a significant amount of...

I am getting the same issue when I connect px1 directly to PC. As soon as data is sent to it FE light comes on and stays on till I remove power. I...

I have a mesh network that has full strength around the entire house. :biggrin2:

Like this at the bottom of the repeater there is an Ethernet port just pluge your v4 in to that and your good to go Sent from my SM-N975U using...

Found the problem - FPP didn't like the encoding of the MP4 file. I used Pinnacle Elements to edit the video and then encoded it to a lower...

All the ss24 boards have been sold

I live in mass lol Just use 2 wifi repeaters it's easy Sent from my SM-N975U using Tapatalk

Anyone live in Massachusetts want to come over and get paid to set this up for me? Kidding. Not really. Everything wired, just need the network...

Yes you can put an FPP/PI next to the controller, but it does not buy you a lot. The V4 has the ability to be an FPP remote with no additional...

For the cable between the Ren64 and the PX1, you should be using an off-the-shelf CAT5 cable.

Reading the version 4 falcon manual, it seems like the multi sync/remote option is what I am looking for. It appears that you have to have the show...

Thanks again. I have more stupid question, do you still need the controller with the pi hat? I was thinking the pixel controller would connect to...

Thanks guys. All this is foreign to me. So I understand there is no way for one controller to send data to another controller wirelessly. But would...