Activity Stream

Using this setup you cannot control the speed off the icicle fall, but when it is off or on. I need to be able t o make them fall faster. Here's why,...

My latest order of RGB pixels, not RGBW pixels flicker with different colors while using any of the V5 updates. I ordered 14 100-pixel strands and 3...

Yes, set up with color handling. Set to white. My box has 32 output ports. Currently using 29. I did delete one channel but added it back and it...

It might also be helpful to create a bug ticket and upload the profile for the devs to take a look at as well. bugs.vixenlights.com Sent...

A black box around an effect on the timeline? That usually indicates an error in one of the filters. Are you using color handling filters? Did you...

Do you have a link to the DMX spec for this fixture? The image of your channels shows channels 2,3,4, 6 and 7 all being color channels.

I made with wizard. But also the fixture has dimmer channel (1) and shutter plus some.extra channels as strobo warm.white and uv even if these last...

Still nothing in the sACNView for universe 1 with it set to fill for all 164 channels Sent from my iPhone using Tapatalk

Mechanical or solid state relays? Have you run a relay test sketch on the arduino?

appreciate the help but you are taking way over my head. The program I'm using is Vixen 3.9u4. I have an Arduino mega 2650 that drives a Sain smart...

Sorry didn?t catch that. Using the FPP tester? Sent from my iPhone using Tapatalk

I didn't suggest sending the data to the pixelsticks. I said to send it to the tester. Don't worry about the pixelsticks until you confirm you're...

Won?t I have to uncheck the enable multicast in the ESPixelStick device setup? I unchecked one of the 1st universe ESPixelStick enable multicast. ...

If reds are blue, then it is not gamma. It is likely the RGB, GRB, BRG, etc is off. Only correct it one place (sequencer or controller).

espixelsticks don't send data. so if you're using the test patterns there, it just ignores the normal input and replaces it by stuffing the output...

yes I only have the 24ch $80.00 each plus postage I'm located in western nebraska

I’ll take a look, thank you. But I don’t remember adding a Nutcracker effect, but I’m probably wrong. Thanks again!

To be honest, I’m not sure. Thank you for notifying them!

Unplugging/plugging didn't work. Guess i'll replace the pixel.

You can post the logs and we can see if there is some error in the scheduled show, but usually that will prevent it from outputting at all. It is...

From the logs, I would say you have some of the deprecated Nutcracker effects in "DONE - Wizards.tim". You need to open it in 3.9u5 and replace those...

I sent the Vixen leads an e-mail that you are asking for help. From looking at the logs it looks like there is a bad sequence referenced in your...

Here is testing with the ESPixelStick testing screen (Universe 1 Ch 1 - 49) all lights physically are on. Here is the same using the FPP...

I assume this is an LED fixture capable of displaying any color the color property should be set to the "Any color" option on the image you posted. ...

Nope I?ll have to try that tonight or tomorrow when I am working remotely. Sent from my iPhone using Tapatalk

On the show PC I use the wifi to connect to my home network (10.0.0.XXX). I connect to it via remote desktop to monitor or make edits. On the...